Fluke 773 On Demand

Fluke 773 milliamp clamp meter is accurate, saves time & money by measuring output

signals without bringing down the system, and adds simultaneous mA source/measure.

·         The 773 mA Clamp Meter features:

·         Best in class 0.2% accuracy mA resolution and sensitivity

·         Measure 4 to 20 mA signals without “breaking the loop

·         Measure mA signals for PLC and control system analog I/O

·         Dual backlit display with both mA measurement and percent of 4 to 20 mA span

·         Measurement Spotlight illuminates hard to see wires in dark enclosures

·         Detachable clamp with extension cable for measurements in tight locations

·         Measure 10 to 50 mA signals in older control systems using the 99.9 mA range

·         Automatically change the 4 to 20 mA output for remote testing

·         Power saving features, auto-off, backlight timeout extend battery life

·         Hold function captures and displays changing measurements

·         Measure 4 to 20 mA signals with in-circuit measurement

·         Simultaneous mA in-circuit measurement with 24V loop power for powering

          and testing transmitters

·         Source 4 to 20 mA signals for testing control system I/O or I/P

·         mA output linear ramp or 25% step outpu

·         Automatically change the 4 to 20 mA output for remote testing

·         DC voltage measurement to verify 24V power supplies or voltage I/O signals

·         Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals

·         Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20

          mA signal measured by the mA clamp

·         Enables milliamp signal logging to a separate logging device without breaking the loop

·         Output mA signal enables a logging DMM or other device to record the 4- to 20 mA

          signal without breaking the loop

·         mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal

·         Apply a mA input signal to a device and measure its’ 4-20 mA output on devices

         
          such as valves or mA isolators

·         Voltage output linear ramp or 25% step output

·         Automatically change the voltage output for remote testing

For More Specification Click On Below Link:

http://en-us.fluke.com/products/ma-loop-calibrators/fluke-773-process-calibration-tool.html#features